Register | Login | Set as Home Page | Bookmark | General Enquiries | Help | Saturday, 30th of August 2008
Energy Online Logo Click to visit sponsors web site
Search 
Magazine 
The Latest Energy Prices
Carbon euro euro


Register for our ENewsletter


Click to visit sponsors web site



Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site





Click to visit http://www.llumarlite.co.uk

£100 000 saving from one fan
April 1st 2005

Free softstarter handbook With over 20 years’worth of knowledge and expertise in the design and supply of low voltage softstarter equipment, the 86-page handbook from ABB provides a guide to softstarter technology for both the novice and expert alike.

Availabale free of charge in a pdf format, the handbook is crammed with diagrams, illustrations and colour photographs.A useful glossary of terms also provides a helpful reference for those unfamiliar with the jargon.

A copy of the handbook can be obtained by sending an email to energy@gb.abb.com with the reference ‘Softstarter handbook’, together with your name, company and postcode details.

ABB equipment installed for £20 000 is saving over £100 000 a year at Salt Union’s plant in Runcorn, Cheshire. Replacing a single oversized fan with a smaller version equipped with speed control has cut the energy consumption on one of the plant’s dryers by over 60%.

Salt Union has a flowsheet capacity of producing a million tonnes of salt every year at the Runcorn site.As well as food grade pure dried vacuum salt, the plant also produces a courser granular product as well as tablets.The dryer in question processes a coarse, granular product used in applications such as dishwashers.

The previous fan sucked air through the dryer at a rate controlled by a damper in the pipeline.During normal operation, this damper was 95% closed so most of the fan’s energy was being used to suck the air through the narrow constriction. An energy survey by ABB Drives Alliance member Central Electrical was carried out to determine what potential savings could be achieved.

The original fan motor was rated at 337kW, but Central Electrical’s calculations showed that 132kW should be enough to create the draft needed by the dryer.“That’s a huge energy saving when you think we run the unit for about 8000 hours a year,”says Electrical Plant Improvement Engineer Dave Mullin.

“In fact, it equates to over 1.6GWh/y.” The old fan was replaced by a smaller version from Fan Systems of Halifax, equipped with a 132kW four-pole motor coupled to an ABB industrial drive.The resulting energy savings now average a staggering £9000 a month.

The original fan was badly oversized for historical reasons.The dryer was previously used to process vacuum salt crystals, which are much smaller than the spherical,2-3mm diameter particles in granular salt.

The fine crystals created a far bigger pressure drop across the dryer than today’s coarse product.

It’s a common problem, according to Ken Tym of Central Electrical:“Industries and processes change, but there are a lot of areas that manufacturers don’t seem to consider. Sometimes it’s about reeducating end users about the energy savings that are achievable.”

At Salt Union, energy-saving initiatives aren’t confined to the process. Even the small amount of waste heat now produced by ABB’s variable speed drive is being put to work warming up the switch room in winter.“It’s not a major saving but it’s good to be using a waste product in this way,” says Mr Mullin.

More articles from ABB Ltd (Drives & Motors):